WhatOil logo WHAT OIL
  • What oil for my car
  • EN
    • EN
    • LT
    • ES
    • HU

Vehicles using 18SE engine list:

  • OPEL - Kadett 1.8i (82kW) 1986–1991
  • VAUXHALL - Astra / Belmont 1.8i (82kW) 1986–1991

Recommended oil for engine 18SE engine.

Ask AI about any Engine code
Questions strictly about engine codes (brand/model/engine type/production years).
Oil Specs Comparison
Castrol MAGNATEC 10W‑40 A/B
Castrol MAGNATEC 10W‑40 A/B
SAE 10W‑40✔
ACEA A3/B4✔
API SP✔
MB‑Approval 226.5/229.3✔
Renault RN0700 / RN0710✔
VW 501 01 / 505 00✔
Fiat 9.55535‑D2✔
Wolf GuardTech 10W‑40 B4
Wolf GuardTech 10W‑40 B4
ACEA A3/B4✔
API SN✔
MB‑Approval 229.1❓
Renault RN0700 / RN0710✔
VW 501 01 / 505 00✔
Fiat 9.55535‑D2✔
Champion Active Defence 10W‑40 B4
Champion Active Defence 10W‑40 B4
ACEA A3/B4✔
API SN✔
MB‑Approval 229.1❓
Renault RN0700 / RN0710✔
VW 501 01 / 505 00✔
Fiat 9.55535‑D2✔
MPM Part Synthetic 10W‑40
MPM Part Synthetic 10W‑40
ACEA A3/B4✔
API SN/CF✔
MB‑Approval 229.3❓
Renault RN0700 / RN0710✔
VW 501 01 / 505 00✔
Fiat 9.55535‑D2✔
Oil specification key
✔ – Meets the required specification
❓ – Not explicitly stated (use caution; check your vehicle manual)
❌ – Does not meet required specification. Use may cause engine issues.

Answer generated by AI.

Oil specifications for 18SE engine

SAE 10W-40
API SJ

Most common problems, symptoms & fixes for the 18SE engine.

Engine 18SE

Symptoms:
- Rough idling and hesitation during acceleration
- Loss of power and reduced fuel efficiency
- Engine misfires or stalling at low RPM
- Overheating or coolant leaks
- Unusual noises such as knocking or ticking

Diagnosis:
- Check ignition components (spark plugs, wires, distributor cap) for wear or damage
- Inspect fuel delivery system including injectors and fuel filter for clogging
- Perform compression test to assess cylinder health and valve sealing
- Examine cooling system for leaks, thermostat operation, and radiator condition
- Scan for any fault codes if equipped with electronic control units

Fixes:
- Replace worn or fouled spark plugs and ignition parts to restore proper firing
- Clean or replace fuel injectors and fuel filter to ensure correct fuel flow
- Repair or replace gaskets and seals if compression test indicates leaks
- Flush cooling system, replace thermostat, and repair any leaks to prevent overheating
- Adjust or replace timing components if knocking noises persist
- Regularly service engine oil and filters to maintain lubrication and reduce wear

Prevention:
- Follow manufacturer’s recommended maintenance schedule for ignition and fuel systems
- Use quality fuel and oil to minimize deposits and wear
- Regularly check coolant levels and condition to avoid overheating
- Address minor symptoms early to prevent major engine damage
- Store vehicle properly if unused for extended periods to avoid fuel system issues

-NO INFO-
© 2025 Copyrights: WHAT OIL

* The engine oils listed on this website are general recommendations based on publicly available data. For the most accurate and suitable oil type for your vehicle, always refer to your car's owner manual or technical documentation. Oil specifications may vary depending on engine version, production year, driving conditions, and other factors. If in doubt, consult your vehicle manufacturer or a certified mechanic.