WhatOil logo WHAT OIL
  • Milyen motorolaj kell az autóba?
  • HU
    • EN
    • LT
    • ES
    • HU

4G63T motorral szerelt járművek listája:

  • MITSUBISHI - Starion 2.0 Turbo (132kW) 1984–1986
  • MITSUBISHI - Galant 2.0 Turbo (110kW) 1985–1987

Ajánlott motorolaj a motorhoz 4G63T motor leggyakoribb problémái, tünetei és javítási megoldásai.

Kérdezd meg a MI-t bármely motorkódról
Csak motorkódokkal kapcsolatos kérdések (márka/modell/motortípus/gyártási évek).
Oil Specs Comparison
Castrol MAGNATEC 10W-40 A3/B4
Castrol MAGNATEC 10W-40 A3/B4
SAE 10W-40✔
ACEA A3/B3✔
ACEA A3/B4✔
API SN✔
Fiat 9.55535-D2✔
MB-Approval 226.5✔
Renault RN0700✔
Renault RN0710✔
VW 501 01✔
VW 505 00✔
Shell Helix HX7 10W-40
Shell Helix HX7 10W-40
SAE 10W-40✔
ACEA A3/B3✔
ACEA A3/B4✔
API SN✔
Fiat 9.55535-D2❓
MB-Approval 226.5❓
Renault RN0700✔
Renault RN0710✔
VW 501 01❌
VW 505 00✔
Total Quartz 7000 10W-40
Total Quartz 7000 10W-40
SAE 10W-40✔
ACEA A3/B3❓
ACEA A3/B4✔
API SN✔
Fiat 9.55535-D2❌
MB-Approval 226.5❓
Renault RN0700❌
Renault RN0710❌
VW 501 01✔
VW 505 00✔
Valvoline MaxLife 10W-40
Valvoline MaxLife 10W-40
SAE 10W-40✔
ACEA A3/B3❓
ACEA A3/B4✔
API SN✔
Fiat 9.55535-D2✔
MB-Approval 226.5❓
Renault RN0700✔
Renault RN0710✔
VW 501 01❌
VW 505 00✔
Olajspecifikációk jelmagyarázata
✔ – Megfelel az előírt specifikációnak
❓ – Nincs kifejezetten feltüntetve (óvatosan: ellenőrizd a jármű kézikönyvét)
❌ – Nem felel meg az előírt specifikációnak. Használata motorproblémákat okozhat.

A választ az MI generálta.

Motorolaj-specifikációk 4G63T motor

SAE 10W-40
API SJ
API SL
API SM

A 4G63T motor.

Engine 4G63T

Symptoms:
- Loss of power or turbo lag
- Excessive smoke from exhaust (blue or black)
- Engine knocking or pinging under load
- Overheating or coolant loss
- Oil leaks or burning oil smell
- Rough idle or misfires

Diagnosis:
- Check turbocharger for shaft play, oil leaks, or damaged turbine blades
- Inspect intercooler and piping for leaks or blockages causing boost loss
- Perform compression test to assess cylinder health and head gasket integrity
- Examine spark plugs for fouling or uneven wear indicating ignition or fuel issues
- Monitor coolant levels and pressure test cooling system for leaks
- Check timing belt condition and tension, as failure can cause severe engine damage
- Scan for any fault codes if equipped with electronic control systems

Fixes:
- Replace or rebuild turbocharger if worn or damaged
- Repair or replace leaking intercooler hoses and clamps
- Replace head gasket if compression test indicates failure
- Change spark plugs and ignition components as needed
- Flush and refill cooling system; repair leaks and replace thermostat or radiator if necessary
- Replace timing belt and associated components (tensioner, water pump) at recommended intervals
- Address oil leaks by replacing seals and gaskets; ensure proper oil level and quality

Prevention:
- Regularly change engine oil and use manufacturer-recommended grade to protect turbo bearings
- Maintain cooling system with periodic flushes and inspections to prevent overheating
- Replace timing belt at specified mileage to avoid catastrophic engine damage
- Use quality fuel and keep ignition system in good condition to prevent knocking
- Inspect turbocharger and intercooler system periodically for early signs of wear or leaks
- Avoid prolonged idling and allow turbo to cool down after hard driving to extend turbo life
© 2025 Copyrights: WHAT OIL

* The engine oils listed on this website are general recommendations based on publicly available data. For the most accurate and suitable oil type for your vehicle, always refer to your car's owner manual or technical documentation. Oil specifications may vary depending on engine version, production year, driving conditions, and other factors. If in doubt, consult your vehicle manufacturer or a certified mechanic.