WhatOil logo WHAT OIL
  • Milyen motorolaj kell az autóba?
  • HU
    • EN
    • LT
    • ES
    • HU

M102.018 motorral szerelt járművek listája:

  • MERCEDES_BENZ - 190 E 1.8 (80kW) 1990–1993

Ajánlott motorolaj a motorhoz M102.018 motor leggyakoribb problémái, tünetei és javítási megoldásai.

Kérdezd meg a MI-t bármely motorkódról
Csak motorkódokkal kapcsolatos kérdések (márka/modell/motortípus/gyártási évek).
Oil Specs Comparison
Castrol MAGNATEC 5W‑30 A3/B4 (Ref)
Castrol MAGNATEC 5W‑30 A3/B4 (Ref)
SAE 5W‑30✔
ACEA A3/B4✔
API SL/CF✔
MB‑Approval 226.5 / 229.3 / 229.5✔
Renault RN0700/0710✔
VW 502.00/505.00✔
Fiat 9.55535‑G1✔
Motul 8100 X‑CESS 5W‑30
Motul 8100 X‑CESS 5W‑30
SAE 5W‑30✔
ACEA A3/B4✔
API SL✔
MB‑Approval 226.5 / 229.3 / 229.5❓
Renault RN0700/0710❓
VW 502.00/505.00❓
Fiat 9.55535‑G1❓
Valvoline SynPower 5W‑30
Valvoline SynPower 5W‑30
SAE 5W‑30✔
ACEA A3/B4✔
API SL/CF✔
MB‑Approval 226.5 / 229.3 / 229.5✔
Renault RN0700/0710✔
VW 502.00/505.00✔
Fiat 9.55535‑G1❌
Everest EuroLine 5W‑30
Everest EuroLine 5W‑30
SAE 5W‑30✔
ACEA A3/B4✔
API SL/CF❓
MB‑Approval 226.5 / 229.3 / 229.5✔
Renault RN0700/0710✔
VW 502.00/505.00✔
Fiat 9.55535‑G1✔
Olajspecifikációk jelmagyarázata
✔ – Megfelel az előírt specifikációnak
❓ – Nincs kifejezetten feltüntetve (óvatosan: ellenőrizd a jármű kézikönyvét)
❌ – Nem felel meg az előírt specifikációnak. Használata motorproblémákat okozhat.

A választ az MI generálta.

Motorolaj-specifikációk M102.018 motor

SAE 10W-40
API SJ
MB 229.0

A M102.018 motor.

Engine M102.018

Symptoms:
- Rough idling and stalling
- Loss of power and poor acceleration
- Increased fuel consumption
- Engine misfires or hesitation
- Hard starting, especially when cold

Diagnosis:
- Check ignition components: spark plugs, ignition wires, distributor cap, and rotor for wear or damage
- Inspect fuel system: fuel filter clogging, fuel pump pressure, and injector condition
- Examine vacuum lines and intake manifold for leaks causing lean mixture
- Test engine sensors such as the coolant temperature sensor and air flow meter for proper operation
- Perform compression test to rule out internal engine wear or valve issues

Fixes:
- Replace worn or fouled spark plugs and ignition components to restore proper firing
- Clean or replace clogged fuel filter and ensure fuel pump delivers correct pressure
- Repair or replace cracked or leaking vacuum hoses and intake manifold gaskets
- Service or replace faulty sensors to ensure accurate fuel and ignition control
- Adjust or replace distributor components to maintain correct ignition timing
- If compression is low, inspect and repair valves, piston rings, or head gasket as needed

Prevention:
- Regularly replace spark plugs and ignition parts according to maintenance schedule
- Change fuel filter every 20,000 to 30,000 km to prevent clogging
- Use quality fuel and keep fuel system clean to avoid injector issues
- Inspect vacuum hoses periodically for cracks or brittleness and replace if necessary
- Maintain cooling system to prevent overheating, which can damage engine components
- Follow scheduled maintenance for timing chain and valve adjustments to ensure engine longevity
© 2025 Copyrights: WHAT OIL

* The engine oils listed on this website are general recommendations based on publicly available data. For the most accurate and suitable oil type for your vehicle, always refer to your car's owner manual or technical documentation. Oil specifications may vary depending on engine version, production year, driving conditions, and other factors. If in doubt, consult your vehicle manufacturer or a certified mechanic.