WhatOil logo WHAT OIL
  • Milyen motorolaj kell az autóba?
  • HU
    • EN
    • LT
    • ES
    • HU

M272.964 motorral szerelt járművek listája:

  • MERCEDES_BENZ - CLS 350 (200kW) 2004–2006
  • MERCEDES_BENZ - E 350 (200kW) 2005–2007
  • MERCEDES_BENZ - E 350 (200kW) 2007–2009

Ajánlott motorolaj a motorhoz M272.964 motor leggyakoribb problémái, tünetei és javítási megoldásai.

Kérdezd meg a MI-t bármely motorkódról
Csak motorkódokkal kapcsolatos kérdések (márka/modell/motortípus/gyártási évek).
Oil Specs Comparison
Castrol EDGE 0W-40 A3/B4
Castrol EDGE 0W-40 A3/B4
ACEA A3/B4✔
API SP✔
BMW Longlife-01✔
MB 229.5✔
Porsche A40✔
Renault RN0700/0710✔
VW 502 00/505 00✔
Ford WSS-M2C937-A✔
Motul 8100 X‑Max 0W‑40
Motul 8100 X‑Max 0W‑40
ACEA A3/B4✔
API SP✔
BMW Longlife‑01✔
MB 229.5✔
Porsche A40✔
VW 502 00 / 505 00✔
Renault RN0700/0710✔
Ford WSS‑M2C937‑A✔
Total Quartz 9000 Energy 0W‑40
Total Quartz 9000 Energy 0W‑40
ACEA A3/B4✔
API SP✔
BMW Longlife‑01✔
MB 229.5✔
Porsche A40✔
VW 502 00 / 505 00✔
Renault RN0700/0710✔
Ford WSS‑M2C937‑A✔
Petronas Syntium 7000 0W‑40
Petronas Syntium 7000 0W‑40
ACEA A3/B4✔
API SP✔
BMW Longlife‑01✔
MB 229.5✔
Porsche A40✔
VW 502 00 / 505 00✔
Renault RN0700/0710✔
Ford WSS‑M2C937‑A✔
Olajspecifikációk jelmagyarázata
✔ – Megfelel az előírt specifikációnak
❓ – Nincs kifejezetten feltüntetve (óvatosan: ellenőrizd a jármű kézikönyvét)
❌ – Nem felel meg az előírt specifikációnak. Használata motorproblémákat okozhat.

A választ az MI generálta.

Motorolaj-specifikációk M272.964 motor

SAE 5W-40
ACEA A3/B4
API SN
MB 229.5

A M272.964 motor.

Engine M272.964

Symptoms:
- Rough idling and misfires
- Loss of power or hesitation during acceleration
- Engine warning light (Check Engine Light) illumination
- Unusual noises such as rattling or ticking from the engine bay
- Oil leaks around the valve cover or camshaft area

Diagnosis:
- Inspect ignition coils and spark plugs for wear or damage, as misfires are common
- Check for oil leaks at the valve cover gasket and camshaft adjuster seals
- Perform a diagnostic scan to identify error codes related to camshaft timing or misfires
- Examine the balance shaft chain and tensioner for wear or slack, which can cause rattling noises
- Verify proper operation of the variable valve timing (VVT) system, including solenoids and sensors

Fixes:
- Replace faulty ignition coils and worn spark plugs to resolve misfires and rough running
- Renew valve cover gaskets and camshaft adjuster seals to stop oil leaks
- Replace the balance shaft chain and tensioner if excessive wear or noise is detected
- Clean or replace VVT solenoids to restore proper camshaft timing functionality
- Regular oil changes with manufacturer-recommended oil to maintain hydraulic components and prevent sludge buildup

Prevention:
- Adhere strictly to scheduled maintenance intervals, especially oil and filter changes, to avoid sludge and wear
- Use high-quality engine oil meeting Mercedes-Benz specifications to ensure proper lubrication
- Monitor engine performance and address warning lights promptly to prevent escalation of issues
- Periodically inspect ignition components and replace them proactively before failure
- Avoid extended idling and aggressive driving to reduce stress on timing components and seals
© 2025 Copyrights: WHAT OIL

* The engine oils listed on this website are general recommendations based on publicly available data. For the most accurate and suitable oil type for your vehicle, always refer to your car's owner manual or technical documentation. Oil specifications may vary depending on engine version, production year, driving conditions, and other factors. If in doubt, consult your vehicle manufacturer or a certified mechanic.