WhatOil logo WHAT OIL
  • Milyen motorolaj kell az autóba?
  • HU
    • EN
    • LT
    • ES
    • HU

OM601.912 motorral szerelt járművek listája:

  • MERCEDES_BENZ - E 200 Turbo Diesel (55kW) 1992–1995

Ajánlott motorolaj a motorhoz OM601.912 motor leggyakoribb problémái, tünetei és javítási megoldásai.

Kérdezd meg a MI-t bármely motorkódról
Csak motorkódokkal kapcsolatos kérdések (márka/modell/motortípus/gyártási évek).
Oil Specs Comparison
Castrol MAGNATEC 5W‑30 A3/B4 (Ref)
Castrol MAGNATEC 5W‑30 A3/B4 (Ref)
SAE 5W‑30✔
ACEA A3/B4✔
API SL/CF✔
MB‑Approval 226.5 / 229.3 / 229.5✔
Renault RN0700/0710✔
VW 502.00/505.00✔
Fiat 9.55535‑G1✔
Motul 8100 X‑CESS 5W‑30
Motul 8100 X‑CESS 5W‑30
SAE 5W‑30✔
ACEA A3/B4✔
API SL✔
MB‑Approval 226.5 / 229.3 / 229.5❓
Renault RN0700/0710❓
VW 502.00/505.00❓
Fiat 9.55535‑G1❓
Valvoline SynPower 5W‑30
Valvoline SynPower 5W‑30
SAE 5W‑30✔
ACEA A3/B4✔
API SL/CF✔
MB‑Approval 226.5 / 229.3 / 229.5✔
Renault RN0700/0710✔
VW 502.00/505.00✔
Fiat 9.55535‑G1❌
Everest EuroLine 5W‑30
Everest EuroLine 5W‑30
SAE 5W‑30✔
ACEA A3/B4✔
API SL/CF❓
MB‑Approval 226.5 / 229.3 / 229.5✔
Renault RN0700/0710✔
VW 502.00/505.00✔
Fiat 9.55535‑G1✔
Olajspecifikációk jelmagyarázata
✔ – Megfelel az előírt specifikációnak
❓ – Nincs kifejezetten feltüntetve (óvatosan: ellenőrizd a jármű kézikönyvét)
❌ – Nem felel meg az előírt specifikációnak. Használata motorproblémákat okozhat.

A választ az MI generálta.

Motorolaj-specifikációk OM601.912 motor

MB 229.0
SAE 15W-40
API CF-4
NO INFO -

A OM601.912 motor.

Engine OM601.912

Symptoms:
- Rough idling and poor acceleration
- Excessive smoke from the exhaust (black or white)
- Hard starting or failure to start
- Unusual knocking or engine noise
- Loss of power and reduced fuel efficiency

Diagnosis:
- Check for clogged fuel injectors or faulty injection pump causing poor fuel delivery
- Inspect air intake system for leaks or clogged air filter restricting airflow
- Examine glow plugs and glow plug relay for proper operation, especially in cold starts
- Test compression to identify worn piston rings or valves leading to low compression
- Look for turbocharger issues such as worn bearings or boost leaks affecting performance
- Scan for any engine fault codes if equipped with diagnostic connectors

Fixes:
- Clean or replace fuel injectors and service the injection pump to restore proper fuel atomization
- Replace air filter and repair any intake leaks to ensure correct air supply
- Replace faulty glow plugs and relay to improve cold start reliability
- Perform engine overhaul if compression is low due to worn internal components
- Repair or rebuild turbocharger to restore boost pressure and engine power
- Regularly change engine oil and fuel filters to maintain system cleanliness and prevent damage

Prevention:
- Use high-quality diesel fuel and additives to keep injectors clean and prevent deposits
- Adhere to recommended oil change intervals with correct oil grade to protect engine internals
- Replace air and fuel filters as per maintenance schedule to avoid contamination
- Avoid prolonged idling and allow engine to warm up properly before heavy load
- Periodically inspect turbocharger and related hoses for leaks or wear
- Maintain cooling system to prevent overheating and associated engine damage
© 2025 Copyrights: WHAT OIL

* The engine oils listed on this website are general recommendations based on publicly available data. For the most accurate and suitable oil type for your vehicle, always refer to your car's owner manual or technical documentation. Oil specifications may vary depending on engine version, production year, driving conditions, and other factors. If in doubt, consult your vehicle manufacturer or a certified mechanic.