WhatOil logo WHAT OIL
  • Milyen motorolaj kell az autóba?
  • HU
    • EN
    • LT
    • ES
    • HU

OM602.962 motorral szerelt járművek listája:

  • MERCEDES_BENZ - E 250 Turbo Diesel (69kW) 1992–1995

Ajánlott motorolaj a motorhoz OM602.962 motor leggyakoribb problémái, tünetei és javítási megoldásai.

Kérdezd meg a MI-t bármely motorkódról
Csak motorkódokkal kapcsolatos kérdések (márka/modell/motortípus/gyártási évek).
Oil Specs Comparison
Castrol MAGNATEC 5W‑30 A3/B4 (Ref)
Castrol MAGNATEC 5W‑30 A3/B4 (Ref)
SAE 5W‑30✔
ACEA A3/B4✔
API SL/CF✔
MB‑Approval 226.5 / 229.3 / 229.5✔
Renault RN0700/0710✔
VW 502.00/505.00✔
Fiat 9.55535‑G1✔
Motul 8100 X‑CESS 5W‑30
Motul 8100 X‑CESS 5W‑30
SAE 5W‑30✔
ACEA A3/B4✔
API SL✔
MB‑Approval 226.5 / 229.3 / 229.5❓
Renault RN0700/0710❓
VW 502.00/505.00❓
Fiat 9.55535‑G1❓
Valvoline SynPower 5W‑30
Valvoline SynPower 5W‑30
SAE 5W‑30✔
ACEA A3/B4✔
API SL/CF✔
MB‑Approval 226.5 / 229.3 / 229.5✔
Renault RN0700/0710✔
VW 502.00/505.00✔
Fiat 9.55535‑G1❌
Everest EuroLine 5W‑30
Everest EuroLine 5W‑30
SAE 5W‑30✔
ACEA A3/B4✔
API SL/CF❓
MB‑Approval 226.5 / 229.3 / 229.5✔
Renault RN0700/0710✔
VW 502.00/505.00✔
Fiat 9.55535‑G1✔
Olajspecifikációk jelmagyarázata
✔ – Megfelel az előírt specifikációnak
❓ – Nincs kifejezetten feltüntetve (óvatosan: ellenőrizd a jármű kézikönyvét)
❌ – Nem felel meg az előírt specifikációnak. Használata motorproblémákat okozhat.

A választ az MI generálta.

Motorolaj-specifikációk OM602.962 motor

SAE 15W-40
ACEA A3/B3
MB 229.0

A OM602.962 motor.

Engine OM602.962

Symptoms:
- Hard starting or failure to start
- Rough idling and loss of power
- Excessive smoke from the exhaust (black or white)
- Engine knocking or unusual noises
- Oil leaks around the valve cover or injector seals
- Overheating or coolant loss

Diagnosis:
- Check for fuel delivery issues: clogged fuel filter, failing injection pump, or faulty injectors
- Inspect glow plugs and glow plug relay for proper operation, especially in cold starts
- Examine turbocharger for shaft play or oil leaks affecting boost pressure
- Look for vacuum leaks or cracked hoses causing rough idle
- Perform compression test to assess cylinder health and valve sealing
- Check for oil leaks around valve cover gasket and injector seals
- Scan for any fault codes if equipped with diagnostic capability

Fixes:
- Replace clogged fuel filters regularly and clean fuel lines to ensure proper fuel flow
- Service or rebuild injection pump if fuel delivery is inconsistent
- Replace faulty injectors or clean them professionally to restore spray pattern
- Replace worn glow plugs and faulty glow plug relay to improve cold start performance
- Repair or replace turbocharger components if boost pressure is low or oil leaks are present
- Replace valve cover gasket and injector seals to stop oil leaks
- Fix vacuum leaks by replacing cracked hoses or faulty vacuum-operated components
- Address overheating by checking coolant levels, radiator condition, and thermostat operation

Prevention:
- Use high-quality diesel fuel and change fuel filters at recommended intervals
- Regularly inspect and maintain the fuel injection system to avoid clogging and wear
- Change engine oil and oil filter on schedule to protect turbocharger and engine internals
- Monitor and maintain cooling system to prevent overheating
- Avoid prolonged idling and harsh driving to reduce engine stress
- Periodically check for leaks and unusual noises to catch issues early

-NO INFO-
© 2025 Copyrights: WHAT OIL

* The engine oils listed on this website are general recommendations based on publicly available data. For the most accurate and suitable oil type for your vehicle, always refer to your car's owner manual or technical documentation. Oil specifications may vary depending on engine version, production year, driving conditions, and other factors. If in doubt, consult your vehicle manufacturer or a certified mechanic.